By Anil Ananthaswamy
|The full-wave simulation result when light is incident to the black hole (Image: Qiang Cheng and Tie Jun Cui)|
An electromagnetic "black holeMovie Camera" that sucks in surrounding light has been built for the first time.
The device, which works at microwave frequencies, may soon be extended to trap visible light, leading to an entirely new way of harvesting solar energy to generate electricity.
A theoretical design for a table-top black hole to trap light was proposed in a paper published earlier this year by Evgenii Narimanov and Alexander Kildishev of Purdue University in West Lafayette, Indiana. Their idea was to mimic the properties of a cosmological black hole, whose intense gravity bends the surrounding space-time, causing any nearby matter or radiation to follow the warped space-time and spiral inwards.
Narimanov and Kildishev reasoned that it should be possible to build a device that makes light curve inwards towards its centre in a similar way. They calculated that this could be done by a cylindrical structure consisting of a central core surrounded by a shell of concentric rings.
There's no escape
The key to making light curve inwards is to make the shell's permittivity — which affects the electric component of an electromagnetic wave — increase smoothly from the outer to the inner surface. This is analogous to the curvature of space-time near a black hole. At the point where the shell meets the core, the permittivity of the ring must match that of the core, so that light is absorbed rather than reflected.
Now Tie Jun Cui and Qiang Cheng at the Southeast University in Nanjing, China, have turned Narimanov and Kildishev's theory into practice, and built a "black hole" for microwave frequencies. It is made of 60 annular strips of so-called "meta-materials", which have previously been used to make invisibility cloaks.
Each strip takes the form of a circuit board etched with intricate structures whose characteristics change progressively from one strip to the next, so that the permittivity varies smoothly. The outer 40 strips make up the shell and the inner 20 strips make up the absorber.
"When the incident electromagnetic wave hits the device, the wave will be trapped and guided in the shell region towards the core of the black hole, and will then be absorbed by the core," says Cui. "The wave will not come out from the black hole." In their device, the core converts the absorbed light into heat.
Narimanov is impressed by Cui and Cheng's implementation of his design. "I am surprised that they have done it so quickly," he says.
Fabricating a device that captures optical wavelengths in the same way will not be easy, as visible light has a wavelength orders of magnitude smaller than that of microwave radiation. This will require the etched structures to be correspondingly smaller.
Cui is confident that they can do it. "I expect that our demonstration of the optical black hole will be available by the end of 2009," he says.
Such a device could be used to harvest solar energy in places where the light is too diffuse for mirrors to concentrate it onto a solar cell. An optical black hole would suck it all in and direct it at a solar cell sitting at the core. "If that works, you will no longer require these huge parabolic mirrors to collect light," says Narimanov.
(Journal references: Applied Physics Letters (vol 95, p041106), and "An electromagnetic black hole made of metamaterials" by Tie Jun Cui and Qiang Cheng's (preprint archive)
October 14, 2009 — Return to cover.